The MetaPal M2 is one of the most customizable rehab commode chairs on the market. It can be configured with four casters or equipped with large self-propelling wheels mounted at either the front or rear. The M2 is fully adjustable in seat width and depth, and supports extensive customization with a wide range of accessories. The base frame is available in red, white and blue.
COMING SOON
Standard Features
Simple Adjustability
Pull-and-twist locking pins, referred to as Plug Pullers, are positioned throughout the M2. They allow key components to be quickly adjusted and securely locked in place. This simple mechanism requires minimal effort, making setup and repositioning easy for both users and caregivers.
Height Adjustment | Seat Slope
The seat can be independently adjusted up or down without changing the frame height. Using our simple Plug Puller system (no tools or clips required), seat height adjusts between 19″ and 23″. Height and slope are set in 1-inch increments, with up to 4 inches of front-to-back differential.
These adjustments support improved pelvic and trunk positioning and may enhance stability for users with limited trunk control, helping support better reach, balance, and overall comfort.
Seat Aperture
The seat aperture includes fore/aft (front-to-back) adjustment, allowing the seat to move independently of the frame and backrest. It can be positioned up to 2 inches forward or backward to better fit users of different sizes. This feature is standard on all seats.
Multiple Seat Styles
Seat options include molded or dual-layer Visco foam designs. Configurations are available with front, left-side, right-side, or rear openings, as well as closed-front styles. Custom sizes can also be made to order.
The M2 can be configured with four standard locking casters that are easily removable without tools using the Plug Puller hardware included on all M2 chairs. A 20", 22", or 24" wheel can be installed in either the front or rear position. The chair may be ordered with large wheels initially or upgraded after purchase, making this option simple, flexible, and fully user-selectable.
More Standard Features & Accessories
Seat Pan
The seat pan features a raised inner spine running front to back to help reduce splashing and includes a secure lid. The pan sits directly beneath the seat, with the option to lower it between 1 and 5 inches. When removed, the lid can hang from the seat-pan handle, providing a convenient place to store it while the pan is in use.
Headrest
The headrest is easy to adjust and can be positioned up, down, forward, backward, and side to side for optimal support. It is available in two molded sizes—standard and large—and connects using a 1-inch ball-joint mount for enhanced adjustability. Extra extension links can be added when additional height is needed.
Laterals
The T-nut rail is standard on all MetaPal chairs, allowing the laterals to slide up and down for proper vertical positioning. They swing away by lifting upward and lock securely using our Plug Puller hardware. Each lateral can be adjusted forward/back and in/out for optimal width and support. Extra extension links can be added when used with the adjustable back
Thigh Support
All MetaPal seats include mounting hardware to accept thigh supports. The thigh supports can be removed quickly using the Plug Puller system. They are width-adjustable, and extra extension links can be added when narrower positioning is required.
Backrest
A molded backrest can be added and adjusted up or down along the T-nut rail. Optional hardware allows the backrest to shift forward and enables angle adjustment for improved positioning.
Directional Caster Lock
The optional flip-down directional caster lock holds one of the four casters in a fixed position, making it easier for an attendant to steer the chair. This feature requires no tools and can be added at any time.
Dual-Purpose Arm Clip
A phone or handheld shower clip can be mounted to the MetaPal armrest to keep essential items within reach. This accessory can be added at any time. It comes as a set and can be used for either a phone or a handheld shower. No tools are required to switch between the phone holder and shower clip, and the shower clip is designed to fit most standard handheld shower heads
Tensioned Backrest
The tensioned backrest includes five straps that wrap around the frame, providing additional support and adjustability without interfering with the armrests or laterals. A zippered sleeve at the bottom contains a pocket for a 2-inch foam insert to enhance comfort and support.